USA EPA METHOD 23

This system uses a standard Method 5 system augmented by our riserless Method 23 extension glassware. This additional glassware consists of the "S" connector from the filter, horizontal Pyrex coil condenser, XAD sorbent trap and moisture knockout impinger. We also carry the vertical Pyrex coil condenser for use with a riser box that will accommodate the extra height required by the condenser and XAD trap mounted on top of the first impinger. Our 8-impinger coldbox is recommended to accommodate the required M23-RC Coolant Recirculating Pump, the standard Method 5 impinger set and the Method 23 extension glassware. This Method 23 Sampling System can also be used for Method 0010, Determination of Semi-volatile Organic Compounds.

	Method 23 Extension Glassware
GP-150	'S' Connector
GP-151	Horizontal Coil Condenser, Ball Joint with O-ring
GP-151V	Vertical Coil Condenser, Ball Joint with O-ring
GP-152	XAD Resin Trap, Ball Joint with O-ring
GP-153	Short Knockout Impinger, Ball Joint with O-ring, Accommodates XAD Trap
GP-154	Ball Stopper (To Seal XAD Trap Socket End)
GP-155	Stocket Stopper (To Seal XAD Trap Ball End)
M23-RC	Coolant Recirculating Pump, 115V/60Hz
	Methods 23 & 29 Teflon Cleanup and Recovery Tools

PRB-T8	All Teflon 1/2" Probe Brush
PRB-EXT-4	1/4" Teflon Probe Brush Extension with 3/8" Coupler, per foot
M23-CK8	Teflon Coated Stainless Steel Spatula
M23-CK9	Teflon Coated Stainless Steel Forceps
M23-CK11	500 ml Teflon Wash Bottle
M23-CK1224	12" x 24" x 0.03" Virgin PTFE Sheet