| Inicio | Productos | Servicios | Centro de Consulta | Contacto |
USA EPA METHOD 26
|
|
The ESC M26-S1-H Method 26 Sampler includes a 6-impinger glassware set preceded by a heated 3-way Pyrex valve with Teflon plunger and Teflon filter holder attached at the outlet of the heated probe assembly. The M26-VFH valve and filter heater is a modular clamshell oven that mounts on our Method 6 and Method 26 midget sample caddy directly behind the probe support. The particulate matter and halide salts collected on the filter are usually discarded and the impinger solutions are analyzed by ion chromatography. |
|
M26-S1-H |
Method 26 Sampling System |
|
UNI-VOS-110 |
Universal Volatile Organic Sampling Console |
|
CO-FA-# |
Low Flow Adapter,1/4" QC Body,1/2" QC Stem,Vac. Gage,Orifice (# = nominal LPM) |
|
CO-2G-# |
In-Line Flow Adapter, Two Vac. Gages Surrounding Flow Orifice (# = nominal LPM) |
|
CO-QC4-B-SET |
Low Flow DGM Calibration Orifice Set, 3 Brass Orifices, 1/4" QC Stems, Spreadsheet |
|
CO-QC4-SS-SET |
Low Flow DGM Calibration Orifice Set, 3 SS Orifices, 1/4" QC Stems, Spreadsheet |
|
PRA-P3S-3/8 |
3' Heated Miniature Probe Assembly, 3/8" Pyrex Liner |
|
PRL-P3S-3/8 |
3' Pyrex Liner, 3/8", with Cup, 5/8" |
|
PRM-3S |
3' Miniature Probe Liner Heating Mantle |
|
M6-SC |
Method 6/26 Sample Caddy with Probe Support Bracket |
|
M6-CB |
Insulated Midget Impinger Glassware Tray, SS |
|
M6-PPL |
Unidirectional Handheld Probe Purge Pump |
|
UC-25U |
25' Umbilical, Connector Box: 2 Sample Lines, 4 TC Lines, Jumpers, 3 Power Circuits |
|
UA-12 |
SS Umbilical Adapter,12/5 Socket, Thermocouple w/ Mini K Plug, 1/4" SS Tube Outlet |
|
M26-VFH |
Method 26 Valve & Filter Heater, Insulated Aluminum Enclosure, Type K TC |
|
M26-VFH-1 |
Silicone Heat Tape, 1" x 4', 120V, 140W |
|
Glassware: Precision Ground Ball Joint & O-Ring (Screw Joint Glassware is available - Call for Pricing) |
|
|
GSM-26B |
Method 26 Midget Ball Joint Glassware Set |
|
GP-602 |
Adapter, 12/5 Socket to 3/8" Tube |
|
GP-605 |
Elbow Adapter, 12/5 Socket to 1/4" Tube |
|
GP-606 |
3-Way Pyrex/Teflon Valve, 3/8" Inlet, 12/5 Socket, 1/4" Purge Stem |
|
GP-607 |
Midget Impinger, Modified,12/5 Ball Joint with O-Ring |
|
GP-608 |
Midget Impinger, Greenberg-Smith (with Orifice),12/5 Ball Joint with O-Ring |
|
GP-609 |
U-Tube Connector, Midget 12/5 Sockets |
|
GP-611 |
Stainless Steel Pinch Clamp, #12, without Screw |
|
GFT-2-6 |
Teflon Filter Holder, 47mm, 3/8" Fittings |
|
GF2-T-.45 |
PFA Teflon Filter Membrane, 47mm, .45 Micron, 10 pack |
|
GF2-T-1/2 |
PFA Teflon Filter Membrane, 47mm, 1-2 Micron, 10 pack |
