Triple Plus + IR
	The Triple Plus + IR is the ultimate multi-gas personal monitor offering the detection of up to 4 gases simultaneously. It combines simplicity with the ruggedness required for the harshest of environments. Datalogging comes standard. Includes aspirator, hose and shoulder strap.
Non pumped unit			TPP-0141
Pumped unit			TPP-0142
	To configurate your instrument take the base unit TPP-0141 or 0142 and add the sensors you need. Example: Pumped, FL/O2/CO/H2S = TPP-0142/ABCD. Alkaline Instruments are no available.
TPP Sensors		Code	Part Number
FL	Combustible 0-100%LEL	A	S01238
O2	Oxygen, 0-25% v/v	B	S01248
CO	Carbon Monoxide, 0-500ppm	C	S01241
H2S	Hydrogen Sulfide, 0-50ppm	D	S01240
SO2	Sulfur Dioxide, 0-10ppm	E	S01242
NO2*	Nitrogen Dioxide, 0-10ppm	F	S01244
CL2*	Chlorine, 0-5ppm	G	S01829
HCN	Hydrogen Cyanide, 0-25ppm	H	S01725
PH3*	Phospine, 0-5ppm	I	S01252
NH3	Ammonia, 0-50ppm	J	S01726
CLO2	Chlorine Dioxide, 0-1ppm	L	S01871
NO	Nitric Oxide, 0-100ppm	M	S01245
HCL*	Hydrogen Chloride, 0-10ppm	N	S01724
O3*	Ozone, 0-1ppm	O	S01251
VO**	Volatile Organics, 0-100ppm	P	S01253
ETO	Ethylene Oxide, 0-10ppm	Q	S01254
HF*	Hydrogen Fluoride, 0-10ppm	R	S01832
FL	Combustible 0-100% volume	S	S01423
	(auto ranging)
H2	Hydrogen, 0-999ppm,	T	S01250
	0-2000ppm
IRM	Methane 0-100% LEL	IRM	S011316
IRMD**	Methane Dual Range 0-100% LEL & 0-100% Volume	IRMD	S011317
IRP	Propane 0-100% LEL	IRP	S011318
IRPD**	Propane Dual Range 0-100% LEL & 0-100% Volume	IRPD	S011319
IRB	Butane 0-100%	IRB	S011320
IRBD**	Butane Dual Range 0-100% LEL & 0-100% Volume	IRBD	S011321
IRE	Ethylene 0-100% LEL	IRE	S011322
IRED**	Ethylene Dual Range 0-100% LEL 0-100% Volume	IRED	S011323
IRCO2	Carbon Dioxide 0-5%v/v	IRCO2	S011389
	* Readily absorbed gases - they will not be detected if an aspirator or hose is used, and are unsuitable for use in pumped instruments.
	**A maximum of 3 sensors is allowed when ordering a Dual Range sensor.
Triple Plus + Kit
	The kit contains the instrument with the standard accessories, communications software, computer lead, charger/interface and carrying (brief) case with foam inserts. To order the kit, simply add the suffix /K to your instrument description.		/K
	Triple Plus + calibration kit. Contains calibration gas (LEL/OX/CO/H2S), computer lead, software & charger/interface in a case.		GTK200
Triple Plus + Battery Chargers
	Charging lead to fit a vehicle lighter socket		C01296
	Charger/Interface II, 110C ac		C01437
	Drop in charger (no power supply)		C01546
	Drop in charger with 110V ac Power Supply		C01549
	Power Supply for Drop in charger		E01537

Triple Plus + Accessories
	Plastic aspirator probe assembly	APP002
	Replacement filter kit for plastic aspirator probe	APP003
	(includes 3 hydrophobic filters/10 particulate filters)
	Computer lead 9-25 pin	C01295
	Replacement filters for plastic aspirator probe (25 hydrophobic only)	APP004
	Aspirator probe, 3ft long (stainless steel)	C01097
	Rechargeable battery pack (Sealed Lead Acid)	C01253
	Carrying case and belt	C01297
	Aspirator c/w flow adaptor, tubing & bulb	C01298
	Baffle plate (to protect sensor apertures)	C01325
	Computer lead (9 pin to 9 pin)	C01327
	Portables PC software	C01832
	Communications software and computer lead	C01686
	Dilution metal flowhead assembly (50% dilution)	C01755
	Aspirator probe, telescopic to 5ft (stainless steel)	C01757
	Drop line 18ft (for lowering instrument into a pit)	C03141
	In line hydrophobic aspirator filter	ILF001
	In line hydrophobic aspirator filters (pack of 5)	ILF005
	Internal in line membrane filter (pumped version only)	M02118
	Aspirator hose (priced per yard)	M04032
	Ear piece adapter	M04319
	Top label protective film	M05364
	Carrying case for TRP+, Charger, Pouch, Software/Lead	TPP-CASE
Triple Plus + Spares
	Allen key, 2.5mm (for TP+ battery compartment)	C01009
	Allen key, 3mm	C01012
	Aspirator pouch	C01094
	Flowhead Assembly	C01280
	Carrying strap	C01323
	500mA fuse (Charger/Interface)	CIF001
	62mA fuse	E01066
	Encapsulated fuse	E01122
	LCD display	E01331
	Nicad back-up battery	E01332
	Pump, 6V dc	E01426
	Membrane switch	E01693
	Membrane switch (2-screw battery cover)	E01753
	Flexible circuit/connector	E07155
	Battery cover screw, M3	M01337
	Metal flowhead assembly	M01343
	PTFE filter membrane disc for FL & OX sensors	M02095
	Combustible/Oxygen fixing screws M3x25	M03216
	Toxic sensor fixing screws M3x15	M03226
	Circuit board to sounder screws M3x15	M03227
	Circuit board to top molding screws M3x5	M03314
	Flat nylon washer M3	M03445
	Socket cap screw for top fixing, M4x12 (2 required)	M03572
	Socket cap screw for case fixing, M4x25 (2 required)	M03583
	Case fixing nut, M4 (2 required)	M03584
	M4 square nut zinc/clear (2 required)	M03605
	Aspirator bulb	M04001
	4" Tube from flowhead to pump inlet nozzle	M04028
	Sealing washer for FL sensor and sounder	M04128
	Front molding assembly, c/w inserts	M04170
	Front molding assembly, c/w inserts (pumped)	M04170/P
	Front molding assembly (2-screw battery cover)	S011149
	Sensor seal for OX and Toxic sensors	M04177
	Flowhead gasket	M04182
	D' ring for strap	M04218
	Male luer taper pipe fitting	M04382
	I.S. Caution label-UL	M05236
	Calibration label (blank orange for side molding)	M05248
	I.S. Caution label-CSA	M05316
	I.S. Approval label-CSA	M05318
	I.S. Approval label-UL	M05341
	Instruction card (shoulder strap mounted)	M07198
	Pump upgrade kit	S01231
	Alarm assembly	S01261
	Blanking plug kit	S01266
	Battery cover assembly, c/w screw (single) & label	S01268
	Battery cover assembly, 2 screws version & label	S011153
	Rear molding assembly, c/w gaskets & labels	S01269
	Rear molding assembly (2-screw battery cover)	S011154
	Alarm loom	S01358
	Main loom	S01359
	Charger/Interface circuit board	S01458
	Main circuit board c/w display	S01884
	Top molding assembly c/w membrane switch	S01976
	Top molding assembly (2-screw battery cover)	S011152
	I.S. Safety circuit board	S01994