| Inicio | Productos | Servicios | Centro de Consulta | Contacto |
VOST
|
|
The ESC Single and Dual VOST (Volatile Organic Sampling Train) Samplers are used in conjunction with the UNI-VOS-110 Low Flow Control Console to perform SW-846 Methods 0030 and 0031. Volatile organic compounds in the sample stream are passed through a Pyrex coil condenser followed by cartridges packed with Tenax, Tenax/charcoal or Anasorb adsorbent material. The cartridges are thermally desorbed prior to analysis of the volatile organics by gas chromatography/mass spectroscopy. |
|
V-S1 |
SINGLE VOST SAMPLING SYSTEM |
|
Includes: Sample Caddy, 3' VOST Probe, 2 Spare Pyrex Liners, Single VOST Glassware Set, 25' Umbilical, Coolant Recirculating Pump, Insulated Cold Box (Coolant Reservoir). |
|
|
V-S2 |
DUAL VOST SAMPLING SYSTEM |
|
Includes: Same Components As Above Except Dual VOST Glassware Set |
|
|
|
UNI-VOS-110 Low Flow Control Console . The UNI-VOS-110 is the ideal Metering Control Console for accurate volume measurements in low flow gas sampling methods requiring sample rates from 0.5 to 2 liters per minute. The flow rate adjustments, gauges and temperature readouts on the console and the 0.01 Liter resolution of the dry gas meter allow the tester to maintain a constant and accurate flow rate while monitoring gas meter pressure and temperature and five remote temperatures. Two digital temperature controllers are provided for maintaining probe and filter heat.NOTE: Alternatively the C-5000 Isokinetic Control Console can be used with an appropriately sized CO-FA style Orifice Flow Adapter. |
|
UNI-VOS-110-2 |
UNI-VOS Leak-Check Pump Option with Valve & Fittings (Dual VOST Sampling) |
|
CO-QC4-B-SET |
Low Flow Calibration Orifice Set, 3 Brass Orifices, 1/4" QC Stems, 0.5-1.0-2.0 LPM |
|
CO-QC4-SS-SET |
Low Flow Calibration Orifice Set, 3 SS Orifices, 1/4" QC Stems, 0.5-1.0-2.0 LPM |
|
V-SC |
Dual VOST Sample Caddy, Probe Support, 4-Way Valve, Leak Check Vacuum Gage |
|
PRA-P3-V |
3' Heated Probe Assembly with Pyrex Liner |
|
PRL-P3-V |
8mm Pyrex Liner with 5/8" Cup |
|
PRM-3S |
3' Miniature Probe Liner Heating Mantle |
|
UC-25U |
Umbilical w/ Connector Box, 25', Two Sample Lines, 4 TC Lines, 3 Power Circuits |
|
M23-RC |
Coolant Recirculating Pump |
|
VOST GLASSWARE, CAPS & UNIONS |
|
|
GS-V1 |
Single VOST Glassware Set |
|
GS-V2 |
Dual VOST Glassware Set |
|
GP-801 |
Twin Valve, Teflon Plungers, VOST |
|
GP-802-GL |
Coil Condenser for VOST, #18 GL Thread, Glassware Only |
|
GP-803-GL |
Charcoal Trap for VOST, #18 GL Thread, Glassware Only |
|
GP-804-GL |
125ml Filter Flask for VOST, #18 GL Thread, Glassware Only |
|
GP-805 |
Drying Tube for VOST, #22 SVL, Glassware Only |
|
GP-806 |
Adsorption Cartridge for VOST |
|
GP-807 |
Y Inlet Adapter for Dual VOST, 8mm |
|
GP-810 |
S Inlet Adapter for Sinlge VOST, 8mm |
|
GP-326-GL18 |
#18 GL Cap, Bored (Red) |
|
GP-327-GL18-4 |
Seal Ring, Teflon, GL18, 1/4" ID |
|
GP-327-GL18-5 |
Seal Ring, Teflon, GL18, 5/16" (8mm) ID |
|
GP-328-GL25 |
#25 GL Cap, Solid (Red), Teflon Seal |
|
PFA-SU8M |
8mm (5/16") PFA Teflon Union |
|
PFA-SU4 |
1/4" PFA Teflon Union |
|
PFA-RU4-2 |
1/4" - 1/8" PFA Teflon Reducing Union |